Market Focus
Next-Gen Telecom
Networks
As the industry evolves toward 5G, 6G, and beyond, the demand for robust, high-frequency RF interconnect systems has never been greater. Mechanc delivers phase-stable, low-PIM connectors and cable assemblies for every stage of the network — from the radio head to the backhaul.
110 GHz
Max Connector Frequency
<1.05
Typical VSWR (SMA at 18 GHz)
-160 dBc
Low PIM Performance
500+
Telecom-Grade Part Numbers
RF Performance
Built for 5G mmWave & Beyond
Our telecom-optimized connectors are engineered to maintain signal integrity across the entire 5G NR spectrum, from sub-6 GHz macro deployments to 39 GHz mmWave small cells and 110 GHz research platforms.
5G NR Ready
Sub-6 / mmWave / FR2
Sub-6 GHz · 24–39 GHz · 60+ GHz
≤0.05 dB
Insertion Loss at 6 GHz
N-type, SMA, 2.92mm series
-160 dBc
PIM Performance
Low-PIM N-Type & SMA connectors
50 Ω
Controlled Impedance
Precision tolerance ±1 Ω
IP67
Outdoor Rating
Weatherproof base station connectors
-65° to +165°
Temperature Range
All-environment deployment
Telecom Applications
Where Our Products Are Deployed
5G mmWave Base Station
5G NR Base Stations
Low-PIM N-type and SMA connectors for macro and small cell antenna ports. Phase-stable cable assemblies for MIMO radio unit to antenna connections at sub-6 GHz and mmWave 26/28/39 GHz.
N-Type Low PIM
SMA 18 GHz
2.92mm 40 GHz
Fronthaul & Backhaul
Fronthaul & Backhaul Links
Phase-matched cable assemblies for CPRI/eCPRI interfaces between Radio Units and Distributed Units. SMA and 2.92mm precision connectors for microwave backhaul transceivers operating at 6–80 GHz E-band.
Phase-Matched
SMA Precision
E-Band 80 GHz
5G Network Testing
5G Network Testing & OTA
Ultra-low-loss 1.0mm and 1.85mm connectors for VNA-based device characterization up to 110 GHz. Phase-stable cable assemblies for OTA test chambers and conformance testing of 5G NR FR2 devices.
1.0mm 110 GHz
Phase-Stable
VNA Ports
Small Cells & Street Furniture
Small Cells & DAS Networks
Weatherproof IP67 SMA and N-type connectors for 5G small cell radios deployed on street furniture, lampposts, and building facades. Compact SSMA connectors for distributed antenna systems.
IP67 Weatherproof
N-Type Low-PIM
SSMA Compact
Satellite Backhaul (VSAT)
VSAT & Satellite Backhaul
2.92mm and 2.4mm precision connectors for Ka-band and Ku-band VSAT terminals providing backhaul for remote 5G cells. Phase-stable assemblies for BUC/LNB interconnects with minimal signal distortion.
2.92mm Ka-Band
2.4mm 50 GHz
Phase-Stable
6G & THz Research
6G & Terahertz Research
1.0mm precision connectors (DC–110 GHz) for millimeter-wave IC characterization, 6G channel sounding, and sub-THz research platforms. Field-replaceable flange designs enable non-destructive module testing.
1.0mm 110 GHz
Field-Replaceable
Sub-THz
Recommended for Telecom
Products for This Market
RF Connectors
N Connectors
Weatherproof N-type connectors with PIM performance below -160 dBc. Designed for macro base station antenna ports and feeder cable terminations.
Freq: DC–18 GHzParts: 38
Browse N Connectors RF Connectors
2.92mm Connectors
Stainless steel 2.92mm connectors for mmWave base station characterisation and Ka-band backhaul testing up to 40 GHz.
Freq: DC–40 GHzParts: 99
Browse 2.92mm Connectors RF Cable Assemblies
System Interconnect Low-Loss Cable Assemblies - IFC Series
System Interconnect Low-Loss RF Cable Assemblies for High-Frequency Integration The System Interconnect Low-Loss RF Cable Assemblies – IFC Series are engineered for permanent installation between RF systems where…
Freq: DC–110 GHzVSWR: ≤1.15Parts: 56
Browse System Interconnect Low-Loss Cable Assemblies - IFC Series RF Connectors
SMA Connectors
Sub-6 GHz SMA connectors for high-volume 5G infrastructure deployments. Available in PCB, cable and panel-mount configurations.
Freq: DC–18 GHzParts: 115
Browse SMA Connectors Coaxial Cables
Low-Loss & Phase-Stable Precision Test Cables - CFT Series
Phase-stable and low-loss CFT series coaxial cables for repeatable OTA and conformance testing of 5G mmWave devices and modules.
Freq: DC–110 GHzParts: 14
Browse Low-Loss & Phase-Stable Precision Test Cables - CFT Series RF Connectors
1.0mm Connectors
Field-replaceable 1.0mm connectors for 6G research and sub-THz test platforms up to 110 GHz. Our highest-frequency connector offering.
Freq: DC–110 GHzVSWR: ≤1.3Parts: 7
Browse 1.0mm Connectors Selected Products
Specified for 5G Infrastructure
A hand-picked shortlist rather than the whole catalogue — the interfaces most often called out on radio-unit, antenna and backhaul bills of material. Browse the full families above, or tell us the build and we will propose the configuration.
-
2.92mm Female 4-Hole Flange Mount RF Connector – Field Replaceable, 8.64mm Hole Spacing, 0.23mm Pin Diameter
$23.00 Add to cartQuick View -
N Female 4-Hole Flange Mount RF Connector – Field Replaceable, 18.35mm Hole Spacing, 0.38mm Pin Diameter
$23.00 Add to cartQuick View -
N Male to N Male System Interconnect Low-Loss RF Cable Assembly – Use CFS830H Coax
$20.00 Add to cartQuick View -
SMA Female 4-Hole Flange Mount RF Connector – Field Replaceable, 8.64mm Hole Spacing, 0.23mm Pin Diameter
$22.00 Add to cartQuick View
Telecom Engineering Support
Ready to Specify Your RF Interconnects?
Our engineering team supports 5G infrastructure programmes worldwide with custom RF interconnect design, rapid prototyping and volume production.